2007 acura rdx replaced oil pressure solenoid, brake master cylinder now vsa, check brakes codes, 2647 appear. I had a valve cover leak above the Oil pressure solenoid which was repaired. Brake master cylinder replaced and removed 3x last time noticed seal on shaft was torn. Replaced that. Oil pressure solenoid was replaced and connector was also replaced. Drove it home from garage, about 5 miles and today drove around the block. Two blocks away same three codes. Also got emissions code but that went away as I pulled in garage. Anyone have issues like this? Garage mentioned that during diagnostic a lot of different sensors for wheels and brakes were reading as bad, but common sense was this can not happen suddenly.