General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here...

90 teg m/t slips when cold??

Old Mar 9, 2007 | 01:06 AM
  #1  
mr.potatoking's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2007
Posts: 4
From: United States
Default



 
Old Mar 10, 2007 | 01:48 AM
  #2  
AKinDen's Avatar
Regular Member
Joined: Jan 2007
Posts: 137
From: United States
Default

do you mean slips like pops out of gear?
 
Old Mar 10, 2007 | 09:31 AM
  #3  
mr.potatoking's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2007
Posts: 4
From: United States
Default

no like 1st gear is fine 2 if i hit the gas the tranny slips but sometmes it dosent??
 
Old Mar 11, 2007 | 03:18 PM
  #4  
AKinDen's Avatar
Regular Member
Joined: Jan 2007
Posts: 137
From: United States
Default



When it slips, do you lose power, like the engine reves up but you don't go any faster or does your shifter physically pop out? once the car is warm nothing slips right?
 
Old Mar 11, 2007 | 07:24 PM
  #5  
mr.potatoking's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2007
Posts: 4
From: United States
Default

shifter stayes in geAR RPMS jump then i let off on gas a lil bit then it catches and when its warm its ok only cold condition
 
Old Mar 11, 2007 | 08:00 PM
  #6  
AKinDen's Avatar
Regular Member
Joined: Jan 2007
Posts: 137
From: United States
Default



Is your tranny fluid full? Kindasounds like a clutch going out, but it's weird that it's only happening from 1stto 2ndgear when it's cold. Sorry I'm not more help. I'm gonna move this to general techEdited by: AKinDen
 
Old Mar 12, 2007 | 12:03 AM
  #7  
mr.potatoking's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2007
Posts: 4
From: United States
Default

1st is solid 2,3,4,and 5 slip but 2 is more solid then the rest also r grinds every time???
 
Old May 26, 2007 | 04:44 PM
  #8  
snardos's Avatar
Junior Member
Joined: May 2007
Posts: 2
From: Canada
Default

It has to be something with your clutch. There is no way a manual transission can slip becuase there are actual gears meshing with each other. So for the gears to slip they would have to be worn down completelyand they would never work. Also then the problem would be with only one gear or all the gears and wouldn't change with temperature.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
asimms21
TL
3
Jan 30, 2008 04:21 PM
blackteg
Integra
0
Nov 26, 2007 05:57 PM
Ls/Teg
Integra
0
Nov 15, 2006 03:26 AM
FUNK1196
General Tech
12
Oct 29, 2006 01:07 PM
WheelBrokerAng
Private 'Wanted' Classifieds
3
Jul 30, 2005 03:16 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:05 AM.