Built LS/Vtec Turbo Motor FULL SWAP TRADE
#1
05-19-2008, 06:28 AM
ON EBAY!!!! http://cgi.ebay.com/ebaymotors/ws/eB...l?ViewItem& ;item=230253569785]http://cgi.ebay.com/ebaymotors...69785
This is a Turbo LS/Vtec motor set up. It currently has about 1000 miles on it. It is fully broken in at this stage and due to a new born i am unable to continue to keep my car. I have a total of about $10k wrappd up into this setup including entire turbo setup. I am asking $5k or some sort of trade for a bike preferably a 600 Honda. Please email me with any questions at all. I have ran 129mph trap speeds at 11.6 quarter mile. It is capable of much faster runs withsome slicks. Heres some pics and a list of the mods.
Engine + Performance
-L/S V-tec Conversion
-Hondata Tuned Fuel Management System
-B18b1 Block
-B18c1 Head
-Cometic Head Gasket
-ARP Head Studs
-ARP Rod Bolts
-SRP Pistons
-Eagle Rods
-ACT Extreme CLutch and Pressure Plate
-Refinished flywheel
-Decked Head and Block
-Custom Equal Length Turbo Manifold
-T3/T4 Turbo 60 Trm .63 A/R
-HUUUUGe front mount
-Blitz Blow off valve
-2.5"-3" Downpipe Heat Wrapped
-38mm Tial Wastegate
-RC 750cc Injectors
-B+M Fuel Press. Gauge and Fuel Press. Regulator
-Custom PCV OIL Breather System
-Motor Mount inserts SOLID
< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-41";
urchinTracker();
</>
This is a Turbo LS/Vtec motor set up. It currently has about 1000 miles on it. It is fully broken in at this stage and due to a new born i am unable to continue to keep my car. I have a total of about $10k wrappd up into this setup including entire turbo setup. I am asking $5k or some sort of trade for a bike preferably a 600 Honda. Please email me with any questions at all. I have ran 129mph trap speeds at 11.6 quarter mile. It is capable of much faster runs withsome slicks. Heres some pics and a list of the mods.
Engine + Performance
-L/S V-tec Conversion
-Hondata Tuned Fuel Management System
-B18b1 Block
-B18c1 Head
-Cometic Head Gasket
-ARP Head Studs
-ARP Rod Bolts
-SRP Pistons
-Eagle Rods
-ACT Extreme CLutch and Pressure Plate
-Refinished flywheel
-Decked Head and Block
-Custom Equal Length Turbo Manifold
-T3/T4 Turbo 60 Trm .63 A/R
-HUUUUGe front mount
-Blitz Blow off valve
-2.5"-3" Downpipe Heat Wrapped
-38mm Tial Wastegate
-RC 750cc Injectors
-B+M Fuel Press. Gauge and Fuel Press. Regulator
-Custom PCV OIL Breather System
-Motor Mount inserts SOLID
< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-41";
urchinTracker();
</>
#2
05-19-2008, 04:25 PM
Administrator :
Your car is very Hot...sorry you have to sell it.
Great luck with your sale...
[img]smileys/smiley2.gif[/img] WheelBrokerAng
Great luck with your sale...
[img]smileys/smiley2.gif[/img] WheelBrokerAng
#3
05-19-2008, 08:15 PM
< src="http://www.google-analytics.com/urchin.js" =text/>
</>
thankl you
< =text/>
_uacct = "UA-939292-41";
urchinTracker();
</>Edited by: WheelBrokerAng
</>
thankl you
< =text/>
_uacct = "UA-939292-41";
urchinTracker();
</>Edited by: WheelBrokerAng
#6
05-23-2008, 06:40 AM
Administrator :
</font>Now that's what we like to see here in the forums..Something that get'sSOLD...Very Good!!!
[img]uploads/WheelBrokerAng/SoldSignGirl.jpg[/img]
[img]uploads/WheelBrokerAng/SoldSignGirl.jpg[/img]
#7
05-23-2008, 08:17 AM
well it was sold outside outside of the forum but good to know anyway< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-41";
urchinTracker();
</>
urchinTracker();
</>
Thread
Thread Starter
Forum
Replies
Last Post
mskynsx
Private For Sale/Trade Classifieds
0
03-31-2009 12:23 AM
sneezinhatch
Private For Sale/Trade Classifieds
4
05-17-2008 01:15 AM
