Hello everyone just wanted to introduce myself
#1
06-22-2011, 04:35 PM
Hello everyone just wanted to introduce myself
Hello everyone I just want to introduce myself to your forum boards. My name is Julio Alvarez, I have been in the auto/Honda industry for some time now both professional and as well as my own for my own enjoyment all my life.
A little of my back ground: I am formally from the company L&T Japanese Automotive out of La Puente, California and was the driver as well as builder of the L&T/Bisimoto SFWD/Outlaw drag car so I am no stranger to high horse power fwd cars as well as ran several 9 second pass which I will like to improve with my future projects that I will share with all of you. I have a great passion for this industry as well much experience.
I have joined the Bisimoto Engineering Team full time and am here to answer any questions, tech or comments concerning Bisimoto product lines as well as to make new friends that share the same intrestest our industry has to offer.
Feel free to ask/pm and I will be joining in many discussions with all of you.
Thank-you
Julio Alvarez
http://www.bisimoto.com
Here are a few videos and pics of my preivous project
http://www.youtube.com/bisimoto
As far as specs:
Head
Bisimoto spec race port and polish
Bisimoto spec vtec killer cams with extended rocker arms
Bisimoto spec std size intake and inconel std exhaust
Bisimoto spec valve springs and titanium retainers
Bisimoto cam gears
Golden eagle intake manifold with match ported runners
3" throttle body
Block
Bisimoto built and assembled short block
Bisimoto/goldenealge spec sleeves
Custom spec Bisimoto pistons with coatings 84mm
Bisimoto spec aluminum rods
Polished factor GSR crankshaft
Golden Eagle head studs and main studs
Turbo system
Custom spec 71mm inducer Bisimoto/Turbonetics turbo
Full-Race twin scroll top mount manifold
Twin 44m tail wastgates
4in up pipe out the hood
Custom Bisimoto/Spearco intercooler core
3in intercooler piping
Electronics
AEM EMS v2
AEM twin fire ignition module
AEM Pencil coils
AEM EPM
AEM EGT probes
AEM UEGO
A little of my back ground: I am formally from the company L&T Japanese Automotive out of La Puente, California and was the driver as well as builder of the L&T/Bisimoto SFWD/Outlaw drag car so I am no stranger to high horse power fwd cars as well as ran several 9 second pass which I will like to improve with my future projects that I will share with all of you. I have a great passion for this industry as well much experience.
I have joined the Bisimoto Engineering Team full time and am here to answer any questions, tech or comments concerning Bisimoto product lines as well as to make new friends that share the same intrestest our industry has to offer.
Feel free to ask/pm and I will be joining in many discussions with all of you.
Thank-you
Julio Alvarez
http://www.bisimoto.com
Here are a few videos and pics of my preivous project
http://www.youtube.com/bisimoto
As far as specs:
Head
Bisimoto spec race port and polish
Bisimoto spec vtec killer cams with extended rocker arms
Bisimoto spec std size intake and inconel std exhaust
Bisimoto spec valve springs and titanium retainers
Bisimoto cam gears
Golden eagle intake manifold with match ported runners
3" throttle body
Block
Bisimoto built and assembled short block
Bisimoto/goldenealge spec sleeves
Custom spec Bisimoto pistons with coatings 84mm
Bisimoto spec aluminum rods
Polished factor GSR crankshaft
Golden Eagle head studs and main studs
Turbo system
Custom spec 71mm inducer Bisimoto/Turbonetics turbo
Full-Race twin scroll top mount manifold
Twin 44m tail wastgates
4in up pipe out the hood
Custom Bisimoto/Spearco intercooler core
3in intercooler piping
Electronics
AEM EMS v2
AEM twin fire ignition module
AEM Pencil coils
AEM EPM
AEM EGT probes
AEM UEGO
Thread
Thread Starter
Forum
Replies
Last Post