Yet another How-To Article: Changing the Spark Plugs on a '01 MDX
Thread Starter
|
Going To Be A Moderator Soon !
Joined: Jul 2011
Posts: 24
Yet another How-To Article: Changing the Spark Plugs on a '01 MDX
Hey all,
I know that my threads are not as informative nor as entertaining as the kernels of wisdom present in forum member Blossom's threads but hopefully someone will prosper from this walk-through documenting the procedure for replacing the spark plugs on a '01 MDX
1) Remove the intake manifold cover (A) and ignition coil cover (B).
2) Disconnect the Intake Manifold Runner Control (IMRC) actuator connector (A), then remove the IMRC actuator (B).
3) Remove the ignition coils.
4) Remove the spark plugs. Refer to this MDX ignition system diagram if you need a frame of reference.
To install:
1) Install the spark plugs and tighten to 13 ft. lbs. (18 Nm).
2) Install the ignition coil.
3) Connect the negative battery cable.
4) Start her up to see if she runs!
I know that my threads are not as informative nor as entertaining as the kernels of wisdom present in forum member Blossom's threads but hopefully someone will prosper from this walk-through documenting the procedure for replacing the spark plugs on a '01 MDX
1) Remove the intake manifold cover (A) and ignition coil cover (B).
2) Disconnect the Intake Manifold Runner Control (IMRC) actuator connector (A), then remove the IMRC actuator (B).
3) Remove the ignition coils.
4) Remove the spark plugs. Refer to this MDX ignition system diagram if you need a frame of reference.
To install:
1) Install the spark plugs and tighten to 13 ft. lbs. (18 Nm).
2) Install the ignition coil.
3) Connect the negative battery cable.
4) Start her up to see if she runs!
Thread
Thread Starter
Forum
Replies
Last Post
jdtechtalk00
RDX
0
Sep 27, 2011 05:50 PM
jdtechtalk00
TL
1
Sep 24, 2011 06:55 PM
jdtechtalk00
MDX
0
Sep 13, 2011 02:02 PM
miket750
Private For Sale/Trade Classifieds
0
Aug 6, 2007 08:32 PM
