i am thinkin of buildin a 2000 si bottom end to a 1.8 bore/sleeve...with a 95 gsr top end....any input would be great, any idea bout the hp or anything regardin the motor and build....

 

well for all of those who have checked this topic out i have talked to a friend of mine and he said that the combination of what i want and the build cost is around 10 grand.....and the setup is fragile and if the motor goes..its all gonna go.and for the build and c/r i would be spending more on gas then 3 stock hondas...lol i dont want that....so i am gonna stick with my b18 and go with a CP PISTON KIT HONDA B18A1/B1 1.8L DOHC NON VTEC 3.209 BORE 10.5 COMP..so far that is all i have decided on....so that gives me start on my block and i am gonna go from there and ask my cousins at Franklin Motorsports about the machining and rods what ever ones are best for the bottom end setup...thanks for lookin!!