Harmonic balancer trouble
#1
I drive a 91 integra 4 door with a B18 and manual trans. I am replacing my timing belt. I cannot get my harmonic balancer bolt off. I have tried using a pneumatic impact wrench and also tried a 4 foot 1/2 drive breaker bar. I have soaked the whole thing with liquid wrench. I have two questions: Is this bolt backwards threaded? How much torque should be required to loosen this bolt? If anyone has done this before, please tell me how you made it work. Thanks for reading.< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-41";
urchinTracker();
</>
urchinTracker();
</>
#2
it is standard right hand threads
torq at about 140 foot pounds
but...
age and locktight and a over tork will make this hell
i have seen 500+foot pounds to break these loose
get that 4 foot bar out 4 friends and a note from god.
and good luck.
< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-41";
urchinTracker();
</>
torq at about 140 foot pounds
but...
age and locktight and a over tork will make this hell
i have seen 500+foot pounds to break these loose
get that 4 foot bar out 4 friends and a note from god.
and good luck.
< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-41";
urchinTracker();
</>
Thread
Thread Starter
Forum
Replies
Last Post
02AegeanBlue
Private For Sale/Trade Classifieds
3
01-27-2007 02:35 AM
gordon69
Private For Sale/Trade Classifieds
1
10-31-2006 01:32 PM